Win10IoT Add-On (HP Anyware PCoIP Client) VERSION : 24.03 REVISION : A PASS : 1 DESCRIPTION : This package provides the HP Anyware PCoIP Client for supported HP ThinClient models running a supported operating system. HP Anyware PCoIP Client is application that establish PCoIP sessions with remote Windows. Connections can be made to PCoIP agents installed on virtual or physical machines, or to Remote Workstation Cards in physical workstations. CONTENTS : pcoip-client_24.03.2.exe - Install package that installs HP Anyware PCoIP Client. HPAnywarePCoIPClient-24.03.txt - This file contains the Release Notes. ENHANCEMENTS/FIXES: - Smart Cards Authentication for Enhanced Security - Wacom tablet is in left handed mode with client running in full screen and all monitors now operates properly - Error message now appears when the new password doesn't meet complexity requirements KNOWN ISSUES: - The name of network shown in Anyware Health Monitor does not change during a session - Audio Input from microphone may stop after a long period of inactivity - Audio disappears when audio-in is enabled - Bridged USB devices disconnected when switching to Windowed Mode - Client window size is not remembered when crossing multiple monitors - Audio input in PCoIP Software Client with PCoIP Remote Workstation Card does not work - Caps Lock and Kana state can go out-of-sync when a Japanese keyboard is used Workaround: On the client machine, set the input language to non-Japanese when a Japanese keyboard is used. Do not press the Caps Lock key outside of the PCoIP client window when a Japanese keyboard is used. If the Caps Lock state is out-of-sync inside a PCoIP session, disconnect and reconnect to the host. - Microphone Does not Function with Kaspersky Anti-Virus Workaround: The PCoIP Client must be whitelisted in Kaspersky Anti-Virus in order to allow the audio stream for the application to be forwarded. Refer to Kaspersky for instructions on how to whitelist an application for audio stream access. - When entering credentials, pressing Enter in Username field does not advance cursor to Password field Workaround: Use the Tab button or mouse to move from the Username field to the Password field. - Intel UHD driver causes Windows memory leak Workaround: To avoid this issue, install an Intel UHD driver that is not affected: Version 30.0.101.1069 or earlier, or version 31.0.101.3729 or later. Updating the driver to a version that is not affected resolves the issue. - Resizing collaboration session window causes crash Workaround: Avoid re-sizing client window size while participating in a PCoIP Ultra Collaboration session. If this occurs, re-start the collaboration session by sending a new invitation to the Guest Collaborator. - Audio output may stop working when switching devices Workaround: Disconnect and reconnect the session after switching audio devices. - Keyboard and Mouse Freeze when Connected to Remote Workstation Card in Windowed Mode Workaround: If this occurs, switch the client to full-screen mode to reestablish Keyboard and Mouse functionality. - Audio output may randomly stop Workaround: Disconnect and reconnect the session after switching audio devices. - USB driver conflicts with NoMachine software Workaround: Remove the NoMachine software before installing the PCoIP client. - Difficulty in exceeding 150Mbps throughput on Windows Workaround: Windows Update and/or NIC driver updates can reconfigure settings such that UDP throughput is affected. Always ensure the latest drivers from the manufacturer are being used, as well as ensure that Flow Control and Interrupt Moderation are enabled for the NIC used to establish any PCoIP sessions. (These can be found the NIC's Advanced Properties tab within Windows' Device Manager.) - Incompatibility between PCoIP Software Client for Windows and virtual KVM application Synergy Workaround: Disable Synergy when using the PCoIP client. - Wacom Intuos Pro and Intuos 5 tablets cannot be bridged Workaround: Avoid bridging Intuos Pro and Intuos 5 tablets. - Cancelling large USB file transfer fails Workaround: Allow operations on USB devices to complete prior to disconnecting the session. - SanDisk Cruzer USB devices do not work if the PCoIP session is disconnected while a file transfer is in progress Workaround: Avoid disconnecting the device or the session while file transfers are in progress. If a disconnection does occur while transfers are in progress, physically unplug and reconnect the device to the client. If the device fails to mount as a mass storage device after the previous step: 1. Find the SanDisk Cruzer in Device Manager. 2. Right-click on the device and select Uninstall. 3. After uninstall completes, physically unplug and reconnect the device to the client. - USB keyboards do not work in bridged mode Workaround: Do not bridge the keyboard. Keyboards function correctly when locally terminated. - Mouse out of sync due to scaling in dual high-resolution displays Workaround: Set client desktop to single link DVI resolutions. Alternatively, upgrade host GPU to support dual-link resolutions (Tera2 hosts only) SPACE REQUIREMENTS : This add-on requires uncompressed free space on the flash memory (Drive C:) and uncompressed free space in the temporary folder. These space requirements must be met in order to successfully deploy this add-on. 1) Space required on the flash memory for installation : 400 MB 2) Space required on the flash memory after installation : 400 MB (with NTFS Compression) 3) Space required in the temporary folder for installation : 200 MB Note: To ensure that the temporary folder always has the required amount of free space for installation, HP recommends that the %TEMP% and %TMP% variables be temporarily re-defined to a network share on the deployment server, and that the setup program be executed from the deployment server. Otherwise, the add-on may fail to deploy correctly. PREREQUISITES : Note: Install command for HPDM: "set TEMP=C:\temp & set TMP=C:\temp & HPAnywareClient-24.03.msi /quiet" Copyright (c) 2024 HP Development Company, L.P.