~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HP ZCentral Remote Boost 22.1.2 Addon Update for ThinPro 8.0 22.1.2_9359hp1a ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. HP ZCentral Remote Boost 22.1.2 Addon Update for ThinPro 8.0 ============================================================================ HP announces the service pack 'HP ZCentral Remote Boost 22.1.2 Addon Update for ThinPro 8.0'. 2. Support Matrix ============================================================================ Package Platform Image ---------------------------------------------------------------------------- RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar HP ThinPro PC Converter RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar mt45 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar mt46 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar mt645 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t530 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t540 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t550 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t630 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t638 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t640 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t655 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t730 8.0, RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar t740 8.0, 3. What's New ============================================================================ HP ZCentral Remote Boost 22.1.2 packages and dependencies necessary to add HP ZCentral Remote Boost 22.1.2 to ThinPro 8.0. What's new in Release 22.1.2 HP Remote Boost 22.1.2 Sender supports Windows and Linux(R). HP Remote Boost 22.1.2 Receiver supports Windows, Linux(R), and macOS(TM). Defect Fixes: 1. Addressed an issue where the primary user is blocked from connecting with an expired password on a Linux Sender. 2. Addressed an issue where the Linux Sender did not allow users to reconnect after signing out from a session. 3. Addressed an issue where changing the Sender's resolution caused the Sender to crash. 4. Addressed an issue where the change password prompt did not mask the password. 5. Addressed an issue where the Receiver was not populating the hostname when launching the Receiver from an auto-launch file. Operating System Notes: 1. Added support for Windows 11 23H2 2. Added Receiver support for macOS 14 Sonoma What's new in Release 22.1.1 HP Remote Boost 22.1.1 Sender supports Windows and Linux(R). HP Remote Boost 22.1.1 Receiver supports Windows, Linux(R), and macOS(TM). Experience improvements: 1. Added a receiver property to control whether the in-app survey is offered. (Rgreceiver.EnableSurvey=1) 2. Added support for more widescreen displays when using resolution and layout matching. Defect Fixes: 1. Addressed an issue where Collaborators could connect into Linux Senders with expired credentials. 2. Addressed a performance issue on Senders with multiple displays. 3. Addressed a performance issue when using Adaptive Image Quality. 4. Addressed an issue with a Wacom pen where pressing either the middle or right click stylus buttons while hovering wasn't working correctly. 5. Addressed an issue where a Linux system with both the Remote Boost Sender and HP Anyware Agent installed may not start either. Now, the HP Anyware Agent will take precedence. 6. Addressed a receiver issue with fractional scaling (e.g. 150%). 7. Addressed an issue where the macOS installer required Rosetta on an Apple Silicon system to allow installation. The receiver itself has been a universal app since 22.1.0. Operating System Notes: 1. Added support for Windows 10 22H2 2. Added support for Windows 11 22H2 3. Added support for RHEL 9 4. Added support for Ubuntu 22.04 5. Added Receiver support for macOS 13 Ventura What's new in Release 22.1 HP Remote Boost 22.1 Sender supports Windows and Linux(R). HP Remote Boost 22.1 Receiver supports Windows, Linux(R), and macOS(TM). Experience improvements: 1. A user survey was added to the receiver application. 2. A new property was added to the sender to disable input blocking when screen blanking is enabled. This property was added to support customers with 3Dconnexion devices that would not work properly when screen blanking was enabled. Notes: 1. If the sender is not licensed, the receiver will not be able to connect to the sender. Previously the connection was allowed and a dialog was presented to the user that no Remote Boost license was found. Current behavior will block the connection and will inform the user that no license was found for the Sender they are trying to connect to. Please note that when connecting using pre-20.4 releases or the 22.0 release of the receiver users will be presented with an "Authorization failed" message when the connection is denied due to no license found for the Sender they are trying to connect to. Defect Fixes: 1. Addressed an issue where receiver performance could be significantly degraded when using HP3. 2. Addressed an issue where Alt + Scroll keyboard/mouse combination was not being sent properly on Linux systems. 3. Addressed an issue where Mac receiver crashes with uncaught exception. 4. Addressed an issue where you could not login to a RHEL 7.9 KDE sender with 2 or more displays. 5. Addressed an issue where there having both Teradici PCoIP agent and a Remote Boost sender installed on the same system would cause the sender service to continually restart. What's new in Release 22.0 HP Remote Boost 22.0 Sender supports Windows and Linux(R). HP Remote Boost 22.0 Receiver supports Windows, Linux(R), and macOS(TM). Experience improvements: 1. By installing ZCentral Remote Boost 22.0, you will now be able to use both Teradici(R) CA+ and ZCentral Remote Boost with a single license. (The license can only be used to access one remoting solution at a time.) Notes: 1. With ZCentral Remote Boost 22.0, the promotional offer for a free license to use ZCentral Remote Boost on Z by HP workstations will expire on January 1, 2023. After January 1, 2023, a current subscription to HP's remote access software must be purchased for future use of this software version. What's new in Release 20.4 HP Remote Boost 20.4 Sender supports Windows and Linux(R). HP Remote Boost 20.4 Receiver supports Windows, Linux(R), and macOS(TM). Experience improvements: 1. A user survey was added to the receiver application. 2. A new property was added to the sender to disable input blocking when screen blanking is enabled. This property was added to support customers with 3Dconnexion devices that would not work properly when screen blanking was enabled. Notes: 1. If the sender is not licensed, the receiver will not be able to connect to the sender. Previously the connection was allowed and a dialog was presented to the user that no Remote Boost license was found. Current behavior will block the connection and will inform the user that no license was found for the Sender they are trying to connect to. Please note that when connecting using pre-20.4 releases or the 22.0 release of the receiver users will be presented with an "Authorization failed" message when the connection is denied due to no license found for the Sender they are trying to connect to. Defect Fixes: 1. Addressed an issue where receiver performance could be significantly degraded when using HP3. 2. Addressed an issue where Alt + Scroll keyboard/mouse combination was not being sent properly on Linux systems. 3. Addressed an issue where Mac receiver crashes with uncaught exception. 4. Addressed an issue where you could not login to a RHEL 7.9 KDE sender with 2 or more displays. 5. Addressed an issue where there having both Teradici PCoIP agent and a Remote Boost sender installed on the same system would cause the sender service to continually restart. 4. Documentation Set ============================================================================ There is no additional documentation associated with this softpaq. 5. Installation ============================================================================ 5.1 Installing update for ThinPro To install this addon: 1. Use the installer to deploy files to the server. 2. Copy the add-on from the appropriate directory to the "/tmp" directory. 3. On the device, run the command as follows: "xarinstall /tmp/RemoteBoost-22.1.2_9359hp1a-ThinPro-8.0-signed.xar" 4. Reboot the affected devices. Tip: This section describes the manual process of installing packages. To perform the recommended update method, use "Easy Update" in the ThinPro Control Panel. For detailed information see the "HP ThinPro Administrator's Guide". 6. Known Issues ============================================================================ There are no known issues. 7. Additional Notes ============================================================================ There are no additional notes. 8. Release History ============================================================================ 2024-05-08 Package version 22.1.2_9359hp1a - First official installer release 9. Contact Information ============================================================================ For contact and support information, refer to: http://www.hp.com/go/thinclient