TITLE: Intel Serial IO Driver

VERSION: 30.100.1915.1 REV: A PASS: 1
DESCRIPTION:
This package contains the driver that enables the Intel Serial IO Drivers to be
used with supported notebook models that are running a supported operation
system. Intel Serial IO Bus Drivers software stack provides drivers for these IO
modules to control the serial interfaces and sensors that are connected in the
Intel Serial IO buses.

PURPOSE: Routine
SOFTPAQ FILE NAME: SP98960.exe
SOFTPAQ MD5: 75343510f5c54814df5c6292d76cdb7b
SUPERSEDES: SP95535
EFFECTIVE DATE: August 20, 2019
CATEGORY: Driver-Chipset
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks

HARDWARE PRODUCT MODEL(S):
HP ZBook 17 G6 Mobile Workstation
HP ZBook 17 G5 Mobile Workstation
HP ZBook 15 G6 Mobile Workstation
HP ZBook 15 G5 Mobile Workstation
HP EliteBook 1050 G1 Notebook PC
HP ZBook Studio x360 G5 Workstation
HP ZBook Studio G5 Mobile Workstation

OPERATING SYSTEM(S):
Microsoft Windows 10 version 1709 (64-bit)
Microsoft Windows 10 version 1809 (64-bit)
Microsoft Windows 10 version 1903 (64-bit)
Microsoft Windows 10 version 1909 (64-bit)
Microsoft Windows 10 version 2004 (64-bit)
Microsoft Windows 10 version 20H2 (64-bit)

LANGUAGE(S): Global

DEVICES SUPPORTED:
ACPI\INT34BB="Intel(R) Serial IO GPIO Host Controller"
ACPI\INT3450="Intel(R) Serial IO GPIO Host Controller"
PCI\VEN_8086&DEV_9DE8="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_9DE9="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_9DEA="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_9DEB="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_9DC5="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_9DC6="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_A368="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_A369="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_A36A="Intel(R) Serial IO I2C Host Controller"
PCI\VEN_8086&DEV_A36B="Intel(R) Serial IO I2C Host Controller"


ENHANCEMENTS:
- Provides the initial Intel Serial IO Driver.

PREREQUISITES:


HOW TO USE:
NOTE: To install the software in this file, you must be logged in with
Administrator privileges.

1. Download the file by clicking the Download or Obtain Software button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions to
unpack the files to C:\SWSETUP\SP92501 or another directory of your choice.

3. Run the setup program from the directory that contains the unpacked files.
Use the -? key combination to list the command line options for the setup
program.

NOTE: After double-clicking the downloaded file, select This program installed
correctly on the Program Compatibility Assistant screen. This message is
provided by the protection mechanism of Microsoft Windows.


Copyright (c) 2019 HP Development Company, L.P.