[CVA File Information]
CVATimeStamp=20240813T011147
CVASyntaxVersion=2.1A6

[Software Title]
US=HP Z4/6/8Fury-G5 Workstation System BIOS

[US.Software Description]
System BIOS for the Z4 G5, Z6 G5, and Z8 Fury G5 Workstations.   These utilities can be used to restore or update the System BIOS. System BIOS is independent of the Operating System.

[General]
PN=000000-000
Version=01.02.08
Revision=A
Pass=1
Type=ROMPAQ
Category=BIOS - System Firmware
SystemMustBeRebooted=1
VendorName=HP Inc.
VendorVersion=01.02.08

[SupportedLanguages]
Languages=GLOBAL
Countries=GBL

[ProfessionalInnovations]
HPPI=NO
LearnMore=

[DetailFileInformation]
U61.cab=ROM,U61,07,11,20,24

[Softpaq]
SoftpaqNumber=SP153885
SupersededSoftpaqNumber=SP153403
SoftPaqMD5=EE710412E5F9D15D20035FD92E01A535
SoftPaqSHA256=0B913710BEA46666C5B00D9CECE22D5C0F61FBA0D9E75F585297735201683473
SoftPaqSHA512=464156CE6D0C24FE87EB195B6561201B53F0E04E324C5791E2C31AEE12D9D25ADAD3D1663A3598FF3388ADA45F2EB8CF4556ADDBCE0EB1B5FB44142A13B85347

[System Information]
SysId01=0x8961
SysName01=HP Z 6 G5
SysId02=0x8962
SysName02=HP Z 4 G5
SysId03=0x88C1
SysName03=HP Z 8 FURY G5

[Operating Systems]
WT64_1703=OEM
WT64_1709=OEM
WT64_1803=OEM
WT64_1809=OEM
WT64_1903=OEM
WT64_1909=OEM
WT64_2004=OEM
WT64_2009=OEM
WT64_21H1=OEM
WT64_21H2=OEM
WT64_22H2=OEM
W11_21H2=OEM
W11_22H2=OEM
W11_23H2=OEM
W11_24H2=OEM

[Install Execution]
Install="HPUP.exe"
SilentInstall="HPUP.exe"

[Silent installation instructions]
"HPFWUPDREC\HpFirmwareUpdRec64.exe" -s -r -b

[ReturnCode]
0:SUCCESS:NOREBOOT=The action completed successfully.
3010:SUCCESS:REBOOT=A restart is required to complete the install
282:CANCEL:NOREBOOT=Flash did not update because update is an older BIOS version
1602:CANCEL:NOREBOOT=User interrupted install.

[Private]
Private_SSMCompliant=1
HardwareSupportApp_Compliant=0
DPB_Compliant=0
MS_Store_App=0
Private_ReleaseType=Critical
Private_ProductType = Desktops

[Private_Fixes]
The following fixes have been made in BIOS version 01.02.08:
-Fixed security vulnerabilities CVE-2024-22374, CVE-2024-24980
-Fixed issue where ACS (Access Control Services) disable wasn't working.       
-Fixed issue where the Samsung PM9A3 M.2 drive was reporting a DMA error.  
-Added F10 and WMI options to isolate slots from the SMBUS topology to prevent devices which don't properly support SMBUS from interfering with traffic on the bus.   
-Added support for the Broadcom Mega RAID SAS 9540-8i 12Gb/s PCIe SATA/SAS HW RAID controller.  
-Adjusted the default power limits to be accurately set for the installed CPU.   
-Fixed issue where all the drives in the Z Turbo Quad Pro were not being recognized when VROC was enabled.    
-Fixed issue that caused certain expansion chassis to fail after a system reset.   

PCR0 = 86C8BD8094420A6A8B7950AE1F03D91B73AB9749F639987D1884B8B5ECE2420B

[Private_SoftpaqInstall]

1. Download the SoftPaq .EXE file to a directory on your hard drive.
2. Execute the downloaded file and follow the on-screen instructions.
3. Click "Finish" on the pop-up window.
4. Restart the system to complete the BIOS update.

[CVAToolDocumentStamp]
Generated by Release CVA Tool Version 1.0 using Syntax Version 2.0 A1 on 8/13/2024 1:11:47 PM
Copyright (c) 2024 HP Development Company, L.P.