TITLE: Intel ME Firmware 11.6 Consumer SKU - DT
VERSION: 11.8.95.4551 REV: A PASS: Pass
DESCRIPTION:
This package contains the Intel Management Engine (ME) 11.6 Firmware Consumer
SKU Component for supported models without Intel vPro support, which is designed
to provide functionality for referring to the hardware features that operate at
the baseboard level, below the operating system.
PURPOSE: Routine
SOFTPAQ NUMBER: sp151063
SOFTPAQ FILE NAME: sp151063.exe
SOFTPAQ MD5: d6dfb7af4c0c28881be3aac0e3dfa442
SUPERSEDES: sp147844
EFFECTIVE DATE: January 26, 2024
CATEGORY: Firmware
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Desktops
HARDWARE PRODUCT MODEL(S):
HP ProOne 400 G3 AiO
HP ProDesk 400 G4 MT
HP ProDesk 480 G4 MT
HP ProDesk 400 G3 DM
HP 260 G3

OPERATING SYSTEM(S):
Microsoft Windows 10 version 1607 (64-bit)
Microsoft Windows 10 version 1703 (64-bit)
Microsoft Windows 10 version 1709 (64-bit)
Microsoft Windows 10 version 1803 (64-bit)
Microsoft Windows 10 version 1809 (64-bit)
Microsoft Windows 10 version 1903 (64-bit)
Microsoft Windows 10 version 1909 (64-bit)
Microsoft Windows 10 version 2004 (64-bit)
Microsoft Windows 10 version 20H2 (64-bit)
Microsoft Windows 10 version 21H1 (64-bit)
Microsoft Windows 10 version 21H2 (64-bit)
Microsoft Windows 10 version 22H2 (64-bit)
Microsoft Windows 11 version 21H2 (64-bit)
Microsoft Windows 11 version 22H2 (64-bit)

LANGUAGE(S): Global

ENHANCEMENTS:
Intel ME baseline brings architectural security enhancements.
Intel recommends updating to Intel® CSME installer 2328.5.5.0 or later.
Intel recommends updating Intel® LMS version 2316.5.1.2 or later.

FIXES:
Addresses security vulnerabilities: CVE-2023-28389 and CVE-2023-35191 /
CVE-2023-32633 and CVE-2023-27502
PREREQUISITES:
- Intel Management Engine Components Driver must be installed before this
package is run.
NOTE: It is recommended to connect the system to an AC power source before the
Management Engine firmware upgrade is run.
HOW TO USE:
NOTE: To install the software in this package, you must be logged in to the
system with Administrator privileges.

1. Download the file by clicking the Download or Obtain Software button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).

2. Use the Program and Features menu in the Control Panel to uninstall the
fingerprint reader driver on the system.

3. Double-click the downloaded file and follow the on-screen instructions to
unpack the files to C:\SWSETUP\SP151063 or another directory of your choice.

4. Run the setup program from the directory that contains the unpacked files.
Use the -? to list the command line options for the setup program.

NOTE: After double-clicking the downloaded file, select This program installed
correctly on the Program Compatibility Assistant screen. This message is
displayed by the protection mechanism of Microsoft Windows.

Copyright (c) 2024 HP Development Company, L.P.