TITLE: HP BIOS and System Firmware (V74/V75)
VERSION: 01.03.00 REV: A PASS: 1
DESCRIPTION:
This package creates files that contain an image of the System BIOS (ROM) for
the supported computer models with a V74 or V75 family ROM.
PURPOSE: Routine
SOFTPAQ NUMBER: sp150010
SOFTPAQ FILE NAME: sp150010.exe
SOFTPAQ MD5: 83a40d03f35d105a33bf179b5c82543f
SUPERSEDES: sp149438
EFFECTIVE DATE: November 17, 2023
CATEGORY: BIOS - System Firmware
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks
HARDWARE PRODUCT MODEL(S):
HP EliteBook 640 14 inch G10 Notebook PC
HP EliteBook 650 15.6 inch G10 Notebook PC
HP EliteBook 630 13.3 inch G10 Notebook PC

OPERATING SYSTEM(S):
Microsoft Windows 10 All Editions (64-bit)
Microsoft Windows 11

LANGUAGE(S): Global

ENHANCEMENTS:
- Provides the BIOS update. NOTE: HP strongly recommends updating the system
BIOS to address a potential issue with HP Sure Start that can cause some devices
to experience a SecureBoot error at boot.
- Addresses security vulnerabilities CVE-2023-5410.
- Addresses security vulnerabilities CVE-2023-20563, CVE-2023-20565, and
CVE-2023-20571.
- Addresses security vulnerabilities CVE-2023-20569.
- Addresses security vulnerabilities CVE-2023-22329 and CVE-2023-25756.
- Provides support for the 5.15-5.35 GHz band.
- Provides support for the SMBIOS type1 version string for db addition.
- Provides support for HP Intelligent Hibernate.
- Updates the Silicon Initialization Code to version C.0.BA.10 (Memory Reference
Code, version 0.0.4.184).
- Updates the MCU to version 0x411C.

- Includes the following firmware:
Camera Firmware, version 23.1.0.0
ClickPad Firmware, version 22.44.0.0 (Synaptics) / 22.50.0.0 (ELAN)
ELAN Fingerprint Reader Firmware, version 55.196.47.6
Embedded Controller (EC), version 52.2D.00
Graphics Output Protocol (GOP), version 21.0.1065
Management Engine Firmware, version 16.1.30.2264
Power Delivery Firmware, version 4.3.0 (TI) / 2.8.0 (Realtek)
Retimer Firmware, version 3.10.1.1
Touch Controller Firmware, version 21.38.0.0 (G2) / 22.46.0.0 (ELAN)

PCR0 (TPM2.0)
V74: 4B7295D46885D99C4B2A303C2F04C01EDA91131CB7943750B5B7640CCFA7170C
V75: 6AB9154A0D0F7ABE62398D715F47257C4746F2671FF0F68380A3687CE3A45926
FIXES:
- Fixes an issue that occurs after the EBAM and BIOS admin passwords are set
where flashing the BIOS with the correct password causes the Firmware Update and
Recovery Utility interface to display the message, Incorrect password was
entered.
- Fixes an issue on a system running in battery mode with less than 5% battery
capacity remaining where the system fails to power on after High Resolution mode
is enabled in the BIOS setup menu.
- Fixes an issue where an external monitor that is disconnected from the system
while the system is in hibernation cannot be detected when the monitor is
reconnected after the system resumes.
- Fixes an issue where a system cannot be locked after Find, Lock and Wipe is
used to lock the system from a remote server and the system then resumes from
hibernation.
- Fixes an issue that occurs after Windows Update is run which causes a blue
screen event to occur and the system displays the message, Unsupported
Processor.
- Fixes an issue where the system cannot power on automatically from hibernate
or shut down modes when an AC adapter is connected to the system after Power On
When AC Detected is enabled and Battery Health Manager is set to Maximize my
battery health in the F10 BIOS settings.
PREREQUISITES: NONE
HOW TO USE:
1. Download the file by clicking the Download or Obtain Software button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions.

Copyright (c) 2023 HP Development Company, L.P.