TITLE: HP BIOS and System Firmware (R93)

VERSION: 01.04.02 REV: A PASS: 1
DESCRIPTION:
This package creates files that contain an image of the System BIOS (ROM) for
the supported notebook models with an R93 family ROM. This package is used to
flash the System ROM on a supported notebook.

PURPOSE: Routine
SOFTPAQ FILE NAME: sp101295.exe
SOFTPAQ MD5: 98da160f233421c0433b4f83189ff91e
SUPERSEDES: SP100065,sp99556
EFFECTIVE DATE: December 27, 2019
CATEGORY: BIOS
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks

HARDWARE PRODUCT MODEL(S):
HP Elite Dragonfly

OPERATING SYSTEM(S):
Microsoft Windows 10 All Editions (64-bit)

LANGUAGE(S): Global

ENHANCEMENTS:
- Adds a feature in the F10 setup interface to support Automatic DriveLock for
Pyrite NVMe SSD.
- Adds a feature to query DriveLock settings using the HP BIOS Configuration
Utility (BCU).
- Provides separate Administrator and User DriveLock passwords in the F10 setup
interface.
- Adds hidden hotkeys by pressing Fn+E for the insert function and Fn+W for the
pause function.
- Provides support for the Sure View Gen 4 display panel.
- Adds a feature to enable pre-boot DMA protection for PCIe slot/expansion.
- Enhances boot time when the system is powered on without Thunderbolt devices
attached.
- Updates the Intel Management Engine (ME) Firmware to version 12.0.49.1534.

- Provides the following firmware:

EC/SIO Firmware, version 66.3B.00
Cypress Power Delivery (PD) Firmware (CCG5C), version 1.4.0
Intel Legacy VBIOS, version 9.2.1019,A.3
Intel GOP EFI Driver, version 9.0.1092,A.7
PXE Option ROM, version 2.13
PXE UEFI Driver, version 2.021
Management Engine (ME) Firmware, version 12.0.49.1534
ISH Firmware, version 5.0.100.3921
TBT Firmware, version 48.0.1.2.1

FIXES:
- Fixes an issue where the HP Sure Recover help message does not display
properly and is truncated when the BIOS display language is set to Simplified
Chinese or Traditional Chinese.
- Fixes an issue where certain characters are not displayed correctly by the
pre-boot touch screen keyboard.
- Fixes an issue on a system that has both Enhanced BIOS Authentication Mode and
Prompt for Admin Authentication on Capsule Update enabled in the F10 setup
interface where a BIOS update fails and the system displays the message, BIOS
Admin Failed Authentication.
- Fixes an issue where the special symbol display is not correct if the F10
setup interface is changed to the Russian language.
- Fixes an issue which causes the system to boot slower than expected when a
network cable is used to connect the system to a Dell or a Targus USB Display
Link Dock.
- Fixes an issue that occurs when the system attempts to update firmware via FTP
server with proxy from F10 setup interface where the system reports the error,
Failure during data transfer (maximum downloaded content size exceeded).
- Fixes an issue that occurs on a system that is configured to run updates from
a proxy server. The BIOS does not update and the system displays the error
message, Failed to determine if new BIOS is available, when the update is run
without setting the Proxy Server in F10 setup interface.
- Fixes an issue where the system prompts for Power on Authentication with BIOS
Administrator and POST Power-On Password options before a scheduled BIOS update
is run.
- Fixes an issue where the batteries do not recharge properly when the system is
continuously connected to an AC power source.
- Fixes an issue that occurs after factory defaults are applied in the F10 setup
interface and the system is restarted. The battery does not recharge and the
system continues to report that the power adapter is connected.
- Fixes issue when BIOS crisis recovery in UEFI mode from USB A key.
- Fixes extra characters shows in help message of the Intel Management Engine
(ME) option.
- Update feature name from TILE Device to Tile Deactive in HP BIOS Configuration
Utility (BCU) configuration file.

PREREQUISITES:


HOW TO USE:
1. Download the file by clicking the Download or Obtain Software button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions.


Copyright (c) 2020 HP Development Company, L.P.