Open
and close the front cover. The jammed paper is automatically ejected
from the printer.
Gently
pull the paper out of the output tray. If you do not see the jammed
paper or if there is any resistance when you pull, stop and go to
the next step.
Open
the rear cover.
If
you see the jammed paper, push the pressure lever on each side up
and remove the paper. Skip to step 9. If you still do not see the
paper, go to the next step.
Release
the white strip, the rear cover stopper, and fully open the rear
cover, as shown.
Unfold
the duplex guide fully.
While
pushing the fuser lever to the right, open the fuser door.
Pull
the jammed paper out. If the jammed paper does not move when you
pull, push the pressure lever on each side up to loose the paper,
and then remove it.
Return
the lever, door, stopper, and guide to their original position.
Close
the rear cover. Printing automatically resumes.
|