Load Paper in the Tray 1  
 
 


If you cannot see the flash animation, click here
 
   Pull open the Tray1 and remove it from the printer.

   Squeeze the paper width guide and slide it to the desired paper size marked at the bottom of the tray.

   Fan the edges of the paper stack to separate the pages. Then tap the stack on a flat surface to even it up.

    Insert the paper stack into the Tray1 with the print side down.

   Make sure not to overfill the tray and that all four corners are flat in the tray. Do not exceed the paper limit mark. Overfilling the tray may cause a paper jam.

    Insert and slide the Tray1 back into the printer.