Replace Waste Toner Container  
 
 


If you cannot see the flash animation, click here
 
The waste toner container is full or installed incorrectly. replace or reseat the waste toner container.

   Turn the printer off, then wait a few minutes for the printer to cool.

   Open the front cover.

   Pull the waste toner container out of the printer using its handle.

   Remove the containers cap from the left side of the container as shown below, and use it to close the waste toner container opening.

   Open the cap on the new waste toner container and attach it to the left side of the container for future use, as shown
below.

   Insert the new container into position and then push it to make sure that it is firmly seated in place.

   Close the front cover firmly.

   Turn the printer on.