HP Win10IoT Add-On (HP Hotkey Filter)
VERSION  : 1.7.9
REVISION : A
PASS	 : 1

DESCRIPTION:

  The HP Hotkey Filter provides administrators the ability to block key combinations such as Ctrl-Alt-Del and Win-L and redirect these actions to a remote session when connected to VDI. 
  This provides a seamless local-like experience for VDI users.
  The contents of this SoftPaq are locked to only run on the HP thin client series with 64-bit Microsoft Windows 10 IOT Enterprise and later version.

OPERATING SYSTEM(S):  
  Microsoft Windows 10 IOT Enterprise 64-Bit (x86)

LANGUAGE(S):  Global

FIXES:
  -Windows security keys can not be used by admins in local when the system language is French.
  -Windows+P don’t work on remote side if only enable "Always apply Windows+P on this computer to connect to a projector."

ENHANCEMENTS: 
  -Security enhancements
  -Add Amazon WorkSpaces 4.0.6 support
  -Add Microsoft Remote Desktop support

SPACE REQUIREMENTS:
  This add-on requires uncompressed free space on the flash memory (Drive C:)
  and uncompressed free space in the temporary folder. These space requirements
  must be met in order to successfully deploy this add-on.

  1) Space required on the flash memory for installation    : 2 MB
  2) Space required on the flash memory after installation :  2 MB (with NTFS Compression)
  3) Space required in the temporary folder for installation : 5 MB

  To ensure that the temporary folder always has the required amount of free space
  for installation, HP recommends that the %TEMP% and %TMP% variables be
  temporarily re-defined to a network share on the deployment server, and that the
  setup program be executed from the deployment server. Otherwise, then the add-on may fail
  to deploy correctly.

REMARKS:
  The install package, HPHotkeyFilter-01.07.09-Win64.msi, contains only files for installing
  HP Hotkey Filter. It does not execute some commands that are needed to complete the installation
  of the component. To successfully deploy this component to the client, the following steps need
  to be done.

    1) The write filter or Unified Write Filter must be disabled prior to executing the program
	
    2) Any old version of HP Hotkey Filter must be uninstalled and a reboot must be executed 
       prior to installing this program.	
	
    3) Need to update HP Hotkey Support driver to 6.0.12.1 or later version on HP Mobile Thin Clients (for example, the HP mt42.)

    4) Re-enable the write filter and reboot the system.


Copyright (c) 2017-2023 HP Development Company, L.P.