TITLE: HP Anyware Client
VERSION: 23.01

This package provides the HP Anyware Client for supported HP Thin Client models running a supported operating system. 
HP Anyware Client is application that establish PCoIP sessions with remote Windows. Connections can be made to PCoIP agents installed on virtual or physical machines, or to Remote Workstation Cards in physical workstations.

What's new:
-Connection Health Indicator
-Collaboration
-Interface Improvements
-Wacom Tablet Force Proportions
-Bug fixes and stability enhancements.

SPACE REQUIREMENTS :

  This add-on requires uncompressed free space on the flash memory (Drive C:)
  and uncompressed free space in the temporary folder. These space requirements
  must be met in order to successfully deploy this add-on.

  1) Space required on the flash memory for installation    : 400 MB
  2) Space required on the flash memory after installation :  400 MB (with NTFS Compression)
  3) Space required in the temporary folder for installation : 200 MB

 Note: 	To ensure that the temporary folder always has the required amount of free space
 	for installation, HP recommends that the %TEMP% and %TMP% variables be
 	temporarily re-defined to a network share on the deployment server, and that the
 	setup program be executed from the deployment server. Otherwise, the add-on may fail
  	to deploy correctly.



INSTALLATION
Download the file by clicking the Download or Obtain Software button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

    1) The write filter must be disabled prior to execute the Microsoft Windows Desktop client program
    2) Change the environment variables value for TEMP and TMP to c:\temp OR increase the HP Ramdisk (Z drive) to 575MB or greater for proper installation
    3) Reboot (make sure c:\temp is available after step 2)
    4) Run HPAnywareClient-2301.exe to install the Microsoft Windows Desktop client
    5) After executing the program, the write filter must be re-enabled
    6) A reboot must be executed after the changes are committed to the flash memory.

Note: Install command for HPDM: "set TEMP=C:\temp & set TMP=C:\temp & HPAnywareClient-2301.exe /s"

COPYRIGHT: Copyright (c) 2023 HP Development Company, L.P.