Jam in rear and inside the machine  
 
 


If you cannot see the flash animation, click here
 
   Open the rear cover.

   Carefully take the jammed paper out of the machine.

   Hold both edges of the rear cover, and align it as shown in the following figure. Press the rear cover firmly until it clicks.

   Press the top cover lever, completely open the top cover. Hold the top cover and close it slowly and carefully, until the cover is securely latched. If the paper LED blinks, go to next step.

   Press the top cover lever, completely open the top cover.

   Grasp the handles on the print cartridge and pull to remove the cartridge out of the machine.

   Carefully take the jammed paper out of the machine. After removing the jammed paper, check for paper which may be jammed in other parts of the machine..

   Slide the print cartridge back into the machine.

   Close the top cover firmly. The machine will resume printing.