The messages in this chapter are sent by the Guardian TN3270
Server subsystem. The subsystem ID displayed by these messages includes
TN32SERV as the subsystem name.
NOTE: Negative-numbered messages are common to most subsystems. If
you receive a negative-numbered message that is not described in this
chapter, see Chapter 15.
1
STARTED banner
banner
identifies the version of the Guardian TN3270 Server
software for the process.
CauseThe Guardian TN3270 Server process was started.
EffectThe Guardian TN3270 Server process can be configured.
RecoveryInformational message only; no corrective action is needed.
2
SHUTDOWN
CauseA STOP PROCESS command was received by the Guardian TN3270 Server.
EffectThe Guardian TN3270 Server is terminating.
RecoveryInformational message only; no corrective action is needed.
identifies the error returned by the Transmission
Control Protocol/Internet Protocol (TCP/IP) process.
subdev
is the name of the window associated with the session
during which the error occurred.
host-name
is the name of the internet protocol (IP) host (if
known) that is running the Guardian TN3270 Server client session.
ipaddr
is the remote IP address of the client of the Guardian
TN3270 Server session.
port
is the remote port number of the client of the Guardian
TN3270 Server session.
CauseAn error occurred on an input/output (I/O) operation to the
TCP/IP process for the specified session.
EffectThe session is terminated.
RecoveryConsult the HP NonStop TCP/IP Programming Manual for a definition of the error. If the error was due to a network
problem, attempt to reestablish the session. If the error is 4022:
Invalid Argument, or 4108: Unknown Option, review the client’s
socket parameters and procedures and then retry the session connection.
Restart the TCP/IP process if the failure repeats or for other error
conditions.
5
Session terminated. Reason reas Window subdev [ Host: host-name ] IPADDR=ipaddr PORT=port Elapsed days Days hrs:mins:secs
Msgs sent/rcvd: msgs-sent / msgs-rcvd Bytes sent/rcvd: bytes-sent / bytes-rcvd
reas
is the reason the user session was terminated.
subdev
is the name of the window associated with the session
that was terminated.
host-name
is the name of the internet protocol (IP) host (if
known) that is running the Guardian TN3270 Server client session.
ipaddr
is the remote IP address of the client of the Guardian
TN3270 Server session.
port
is the remote port number of the client of the Guardian
TN3270 Server session.
days
is the elapsed time of the session, in number of days.
hrs:mins:secs
is the elapsed time of the session, in hours, minutes,
and seconds.
msgs-sent
is the number of messages sent from the host to the
client during the session.
msgs-rcvd
is the number of messages received from the client
during the session.
bytes-sent
is the number of bytes sent by the host to the client
during the session.
bytes-rcvd
is the number of bytes received from the client during
the session.
CauseA user session was terminated for the reason specified.
EffectThe window is available for reuse unless it was closed due to
an application failure.
RecoveryReestablish the session if necessary.
7
SPI opname Error err
opname
identifies a NonStop Kernel file-system operation.
err
identifies the error returned by the Subsystem Programmatic
Interface (SPI) procedure.
CauseAn error occurred on a call to an SPI routine.
EffectThe Guardian TN3270 Server terminates and creates an Inspect
save file.
RecoveryRestart the Guardian TN3270 Server process.
8
$RECEIVE opname Error err
opname
identifies a NonStop Kernel file-system operation.
err
identifies a file-system error.
CauseA file-system error occurred on the $RECEIVE file.
EffectThe Guardian TN3270 Server terminates and creates an Inspect
save file.
RecoveryRestart the Guardian TN3270 Server process. For a definition
of the specified error, see Appendix B. For more detailed information including
recovery actions, see the Guardian Procedure Errors and
Messages Manual.
9
fsmid State machine
error State=fsm.state Event=fsm.event ( objname )
fsmid
is the identification of the finite state machine
(FSM) within the Guardian TN3270 Server that generated the error.
fsm.state
is the current state of the FSM.
fsm.event
is a signal causing a predetermined action based on
the current state and error.
objname
is the name of the object for which the FSM error
occurred.
CauseAn FSM error occurred.
EffectThe Guardian TN3270 Server terminates and creates an Inspect
save file.
RecoveryRestart the Guardian TN3270 Server process. Contact your service
provider and provide all relevant information as:
Descriptions of the problem and accompanying symptoms
Details from the message or messages generated
Supporting documentation such as Event Management
Service (EMS) logs, trace files, and a processor dump, if applicable
If your local operating procedures require contacting the Global
Mission Critical Solution Center (GMCSC), supply your system number
and the numbers and versions of all related products as well.
identifies the NonStop Kernel source file where the
condition occurred.
edit-linenumber
identifies the line number of the NonStop Kernel source
file where the condition occurred.
CauseThe Guardian TN3270 Server encountered a logical inconsistency
in the code.
EffectThe Guardian TN3270 Server terminates, and then creates an Inspect
save file.
RecoveryRestart the Guardian TN3270 Server process. Contact your service
provider and provide all relevant information as follows:
Descriptions of the problem and accompanying symptoms
Details from the message or messages generated
Supporting documentation such as Event Management
Service (EMS) logs, trace files, and a processor dump, if applicable
If your local operating procedures require contacting the Global
Mission Critical Solution Center (GMCSC), supply your system number
and the numbers and versions of all related products as well.
13
Network opcode error err on tcpip-process
opcode
is the socket operation that returned the error.
err
identifies the error returned by the Transmission
Control Protocol/Internet Protocol (TCP/IP) process.
tcpip-process
is the name of the TCP/IP process that is reporting
the error.
CauseThe Guardian TN3270 Server encountered an input/output (I/O)
error on the socket used to monitor network connections requests.
EffectThe socket to the TCP/IP process is closed and reopened.
RecoveryThe Guardian TN3270 Server continues to try to reestablish the
socket with TCP/IP for errors 14, 66, and 201. Monitor the Guardian
TN3270 Server to see if the socket can be restored. If the Guardian
TN3270 Server cannot automatically restore the socket, restart the
TCP/IP process.
The Guardian TN3270 Server stops or abends for other errors.
If the Guardian TN3270 Server had been running as a NonStop process
pair, the backup process automatically assumes the primary process
role and attempts to maintain the socket with TCP/IP. Monitor the
Guardian TN3270 Server to see if the socket is functioning properly
with TCP/IP. If the socket is not functioning properly, restart the
TCP/IP process.
14
GETHOSTBYADDR error err
err
identifies the error returned by the GETHOSTBYADDR
function.
CauseThe Guardian TN3270 Server encountered an error trying to resolve
a host name by a Domain Name Resolver configured in the RESCONF file.
(The RESCONF file is used by the Domain Name Resolver to configure
the Domain Name Server component of the Transmission Control Protocol/Internet
Protocol (TCP/IP)).
EffectThe Guardian TN3270 Server does not report the client’s
host name in Event Management Service (EMS) errors.
RecoveryReestablish communications with the Domain Name Resolver.
15
Logging switch to: coll
coll
is the name of the Event Management Service (EMS)
collector to which logging was switched.
CauseThe logging changed to the specified EMS collector due to an
operator command or an error on a previous log file.
EffectEMS messages are written to a new EMS collector.
RecoveryInformational message only; no corrective action is needed.
16
Primary Process Established: Process Name =
process-name
process-name
is the Guardian TN3270 Server process.
CauseThe primary process of a Guardian TN3270 Server NonStop pair
started.
EffectThe primary process tries to start a backup process.
RecoveryInformational message only; no corrective action is needed.
17
Backup Process Established: Process Name = process-name
process-name
is the Guardian TN3270 Server process.
CauseThe backup process of a Guardian TN3270 Server NonStop pair
started.
EffectNonStop operation can begin.
RecoveryInformational message only; no corrective action is needed.
18
Primary Process Failed: Process Name = process-name
process-name
is the Guardian TN3270 Server process.
CauseThe primary process of a Guardian TN3270 Server NonStop pair
failed.
EffectThe backup process assumes the role of the primary process.
RecoveryInformational message only; no corrective action is needed.
19
Backup Process Failed: Process Name = process-name
process-name
is the Guardian TN3270 Server process.
CauseThe backup process of a Guardian TN3270 Server NonStop pair
failed.
EffectThe primary process tries to start another backup process.
RecoveryInformational message only; no corrective action is needed.